Big Data Science

🖕🏻3 ways to use the assignment operator in Python and a couple of reasons not to
The walrus operato (:=) to assign value provides following advantages:
• Reducing the number of function calls, for example, result = [y := func(x), y**2, y**3] instead of result = [func(x), func(x)**2, func(x) **3]
• Reducing nested conditionals, such as when typing regular expressions, by removing nested conditions if
• Simplify while loops, such as when reading files line by line or when receiving data from a socket. Instead of a dummy infinite while loop with flow control delegated to the break statement, you can use an assignment statement to reassign the value of the command, and then apply it in that conditional while loop in the same sequence, which results in significantly shorter code.
Of course, there are limitations to using this operator. For example, it is not recommended to use it with, because. when working with ContextManager(), the context is bound to the returned discussion, i.e. to the result of this method. This may be a requirement when debugging.
Also, parenthesize when mastering to ensure that the result is applied when mastered, otherwise the calculation could be done in an arbitrary order.
Code examples: https://betterprogramming.pub/should-you-be-using-pythons-walrus-operator-yes-and-here-s-why-36297be16907

🍁TOP-15 DS-events in September 2022 all over the world:
1. Sep 7-8 • AI for Defense Summit • Washington, DC, USA https://ai.dsigroup.org/
2. Sep 7-9 • Southern Data Science Conference 2022 • Atlanta, GA, USA https://www.southerndatascience.com/
3. Sep 12-14 • TDWI Data Governance, Quality, and Compliance. • Virtual https://tdwi.org/events/seminars/september/data-governance-quality-compliance/home.aspx
4. Sep 13-14 • Chief Data & Analytics Officers, Brazil • Brazil https://cdao-brazil.coriniumintelligence.com/
5. Sep 13-14 • Edge AI Summit • Santa Clara, CA, USA https://edgeaisummit.com/events/edge-ai-summit
6. Sep 13-15 • AI Hardware Summit • Santa Clara, CA, USA https://www.aihardwaresummit.com/events/aihardwaresummit
7. Sep 14-15 • Deep Learning Summit • London, UK https://www.re-work.co/events/deep-learning-summit-london-2022
8. Sep 14-15 • AI in Retail Summit • London, UK https://www.re-work.co/events/ai-in-retail-summit-london-2022
9. Sep 14-15 • Conversational AI Summit • London, UK https://www.re-work.co/events/conversational-ai-summit-london-2022
10. Sep 15-16 • The Modern Data Stack Conference • San Francisco, CA, USA https://www.moderndatastackconference.com/
11. Sep 21-22 • Big Data LDN • London, UK https://bigdataldn.com/
12. Sep 22 • EM Biotech Connect 2022 • Boston, MA, USA https://elementalmachines.com/em-biotech-connect-2022-0
13. Sep 22 • data.world Summit • Virtual https://data.world/events/summit/
14. Sep 26-30 • SIAM Conference on Mathematics of Data Science (MDS22) • San Diego, CA, USA https://www.siam.org/conferences/cm/conference/mds22
15. Sep 29 • Data2030 Summit 2022 • Stockholm, Sweden + Virtual https://data2030summit.com

🗒Need to log Python application events? There is a special module!
Python library logging (https://docs.python.org/3/library/logging.html) defines functions and classes that implement a flexible event logging system for applications and the library. The main advantage of the logging API, an extension of this standard library, is the ability to log all events. Therefore, the Python application log can display native messages inline with messages from external modules.
The module consists of the following classes:
• Registrars require an interface that uses application code.
• Handlers send log entries (created by registrars) to the appropriate destination.
• Filters require more precise definition of the log entries to display.
• Formats for determining the location of entries in the final output.
The level of the log indicates its severity, i.e. How important is a separate message. At the basic logging level, DEBUG has the lowest priority, and CRITICAL has the highest. If we define a logger of message-sensitive logs with the DEBUG level, then all of our logged messages will be logged, since DEBUG is the lowest level. You can configure checking only for events with the ERROR and CRITICAL types.
Сode example: https://medium.com/@DavidElvis/logging-for-ml-systems-1b055005c2c2

🤔Python-library to calendar operations
Python includes a built-in calendar module that includes an operation related to dates and days of the week. The functions and classes use the European calendar module, where Monday is the first day of the week and Sunday is Sunday.
To use this feature, you must first import it into your code:
import calendar
You can then call a function, for example print the names of the months in a list:
month_names = list(calendar.month_name[1:])
print(month_names)
https://docs.python.org/3/library/calendar.html

💥Instead of loops: 3 Python life hacks
Developers and data scientists know that loops in Python are slow. Instead, you can use possible alternatives:
• Map - apply a function to each value of an iterable object(list, tuple, etc. ).
• Filter - to filter out values from an iterable object (list, tuple, sets, etc.). The filtering conditions are set inside a function which is passed as an argument to the filter function.
• Reduce – this function is a bit different from the map and filter functions. It is applied iteratively to all the values of the iterable object and returns only one value.
Examples: https://medium.com/codex/3-most-efficient-yet-underutilized-functions-in-python-d865ffaca0bb

🔥Instead of Jupyter Notebook: Benefits of Deepnote
Jupyter notebooks have been actively using data analytics for many years and contain ML. However, despite its popularity, this research tool has significant implications:
• Difficulty in code versioning. Browsing Jupyter notebooks comes in the form of large JSON files, merging two notebooks is next to impossible. As is the usual use by developers of a Git-like tool version.
• Lack of high efficiency with IDE, code highlighting and tooltips. Usually a Data Scientist is not a professional software developer, and therefore tools that regulate the quality of the code and the value of its increase are very important.
• Difficulties of development through testing. The popular test-driven development methodology (test-driven development) is almost impossible to implement in Jupyter notebooks. Therefore, they cannot be used in data pipelines.
• Non-linear workflow due to transition from one cell to another. This may seem like an irreproducible experiment. The interactive way to encode and navigate between cells is both one of Jupyter Notebook's best features and its biggest weakness.
• Jupyter is not well suited for running long running asynchronous data scoping tasks.
😡
Many of the shortcomings are addressed as an alternative to Jupyter Notebook called Deepnote. Deepnote, like Jupyter, is an interactive notebook for solving a DS problem, but it outperforms its competitor in a number of advantages 💥:
• Real-time Collaboration - Created by Google Docs, you can share links to your notebook with colleagues, giving everyone the desired level of access (view, execute, comment, edit and full control). In addition, a cell in Deepnote allows a collaborator to leave comments, eliminating the need to switch between applications for posting messages and code for providing feedback. With access to the developer's code, managers and other board members easily follow the code development progress and development life cycle.
• Easy environment management deployment - Deepnote takes the job of installing modules and setting up the environment to run Python, including versions. In addition to Python, Deepnote also supports SQL queries.
• Deepnote has the ability to embed blocks of code in blogs and other repositories by implementing the creation of a GitHub project specifically for this purpose. Deepnote Cells allows you to embed code only, embed output only, and embed both code and output.
• Data Visualisation - Jupyter notebooks almost never evaluate EDA execution without explicit coding. Deepnote provides an early development tool in the notebook itself - the early block allows you to generate information, just like building Python, but without the need to write code.
• Save time and money - once Deepnote is in charge of code management and processing, teams don't need to commit their code pipelines to tools like GitHub, BitBucket, etc. thus reducing operating costs.
Try it for free: https://deepnote.com/

👍🏻10 Best Practices for Naming Tables and Fields in a Database
If every developer and analyst followed these simple rules, reverse engineering would become a hobby, not a laborious job. To make it easier for you and your colleagues to work with the database, try these simple rules:
1. Separate words with underscores if the name attribute or database table consists of 2 or more words. This is a more stylish camelCase case, improved readability and conceptual platform dependency. For example, word_count.
2. Write full and semantically based names for tables and columns without reference to data types. Saving a couple of characters will do nothing but confuse. It is permissible to use benefits only where this is an abbreviated name for everyone.
3. Write the attribute name with a lowercase letter to avoid confusion from upper-case SQL keywords. It will also improve your typing speed.
4. Do not use numbers in the names of tables and columns.
5. Name the tables clearly, but briefly.
6. Name tables and columns in the singular. For example, author instead of authors.
7. Name the linking tables in alphabetical order. For example author_book
8. When an index is set, add its table and column name. For example, CREATE INDEX person_ix_first_name_last_name ON person (first_name, last_name);
9. For Boolean column type add prefix name with is_ or has_ . For example is_admin or has_membership.
10. For columns of Date-Time type, add suffix _at or _time to the name. For example, order_at or order_time.
https://dev.to/mohammadfaisal/how-to-design-a-clean-database-1e83

3 types of data anomalies

😱3 types of data anomalies
Data analysts and machine learning professionals often detect anomalies in data – detection that is not detected to pattern detection and detection. There are 3 types of anomalies:
• point anomaly, when one data point (observation) in the data set is far from the sources of the others and represents an extreme, unevenness or deviation that occurs randomly and is not related to the overall load in the data. The point anomaly also eliminates the global outlier because it is significantly different from the rest of the dataset.
• context anomaly, when a particular instance is revealed to be observable from the context. For example, in the case of time series data, such as recording a certain amount over time, the context is temporal. Data points that are very different from other data in the same sense are due to contextual outliers. For example, when the number of cars passing through the checkpoint on the border of the region in March, on average, is 1 thousand over the past 20 years. And in June, when the vacation period begins, this number reaches 8 thousand. If at the beginning of March it is 9 thousand, it will be considered an anomaly, and in the summer it will not be an anomaly. It's common for retail to see shoppers pop up during the holiday season. But a sharp increase in sales outside of holidays or sales can be called a contextual outlier.
• Collective anomaly, where a group of correlated, interrelated, or sequential instances is significantly different from the rest of the data, ie these data points are judged to be anomalous. For time series data, this may look like typical peaks and troughs occurring outside of the time period when the seasonal sequence is normal, or as a set of time series that are in outlier conditions. For example, at the same time, along with a large number of companies, there is a drop in sales, although before that there was an upward trend.
https://medium.com/datadailyread/types-of-data-anomalies-2f6fb1747eb1

11 августа состоится Alfa Data Science MeetUp#2 📟

Участие бесплатное, необходимо зарегистрироваться на сайте, чтобы получить ссылку на онлайн-трансляцию.

Темы и спикеры:
🖲 Развитие клиентской базы: моделирование LTV и прогноз будущих доходов
- Сергей Королёв, Middle Data Scientist Альфа-Банк
🖲 Uplift-моделирование в ценообразовании кредитных продуктов
- Максим Коматовский, Junior Data Scientist Альфа-Банк
🖲 Совершенный код расчёт
- Максим Cтаценко, Team Lead/Senior DWH Developer в Яндекс
🖲 Побеждаем смещение распределения в задаче нейросетевого кредитного скоринга
- Алексей Фирстов, Senior Data Scientist Альфа-Банк

Митап пройдет в интерактивном формате, вопросы спикерам приветствуются, авторы лучших вопросов получат призы от Alfa Digital.

👀Looking for data to train ML-models? Generate it Yourself: 3 Python Packages for Generating Synthetic Data
Synthetic data is an artificially generated, not collected, topic learning dataset for training ML models or practicing analysis techniques. You can create them yourself using possible Python packages:
• Faker is a very simple and efficient Python package for creating their data. It's great when you need to load data into a database, create a use of XML documents, prepare for load testing, or anonymize data retrieved from involved services. https://github.com/joke2k/faker
• SDV (Synthetic Data Vault) is a synthetic data storage for creating synthetic data based on a given dataset. The generated data can be a single summary, pivot table, or time series, and have the same properties and statistics as the original dataset. SDV uses synthetic data with DL models. Even if the original dataset contains multiple data types and gaps, SDV handles them. https://sdv.dev/SDV/
• Gretel Synthetics - a source code package based on a recurrent neural network for generating structured and unstructured data. The batch approach treats a data set as text data and trains a model based on it. The model will then create synthetic data with text data. Gretel is based on RNN networks, it requires more computing power, so when working with it, it is better to use Google Colab, rather than load a personal computer. https://synthetics.docs.gretel.ai/en/stable/

👍🏻4 utilities for working with JSON files
Hadoop and Spark are the most popular big data frameworks for working with big data - large files. But often you need to process many small files, for example, in JSON format, which in Hadoop HDFS are distributed over many data blocks and partitions. The number of partitions determines the number of tasks since 1 task can deal with only 1 partition at a time. This will be a high load for the Application Master and reduction of productivity for the entire cluster. In addition, most of the time is spent only on opening and closing files, and not on reading data.
Therefore, it is worth to combine many small files in large one, which Hadoop and Spark can process very quickly. In the case of JSON files, such a union into an array of records can be done using the tools:
• jq – is used to filter and process incoming JSON data, great for parsing and processing data streams https://stedolan.github.io/jq/
• jo - creates JSON data structures https://github.com/jpmens/jo
• json_pp - displays JSON objects in a more convenient format, as well as convert them between textures https://github.com/deftek/json_pp
• jshon - JSON parser with fast evaluation of large amounts of data http://kmkeen.com/jshon/
https://sidk17.medium.com/boss-we-have-a-large-number-of-small-files-now-how-to-process-these-files-ee27f67dc461

🗣Data analysts speak SQL. How can they understand themselfs?
Every analyst knows 5 rules of SQL query formatting to make them easy to read:
• Place Key Words (SELECT, FROM and WHERE) On New Lines
• List Column Names after SELECT On New Lines
• Indent Sub-Elements On New Line
• Add Subquery Parenthesis On Their Own Lines
• Place Case Statement Conditions On New Lines
However, not all analysts apply these rules in practice. Of course, specialized IDEs take on formatting functions, for example, Visual Studio Code has built-in document formatting capabilities, as well as the ability to connect external extensions such as SQLTools or SqlBeautifier. If you need to read a very big SQL- query from colleagues, presented in the form of flat text, use online formatters to convert the text of the SQL query to a readable form:
• https://codebeautify.org/sqlformatter
• https://www.freeformatter.com/sql-formatter.html
• https://sqlformat.org/

🌸🌤TOP-10 DS-events in August 2022 all over the World:
• Aug 5, Bayesian Modelling Applications Workshop. Eindhoven, The Netherlands + Virtual. http://abnms.org/uai2022-apps-workshop/
• Aug 8-12, Data Matters. Virtual. https://datamatters.org/
• Aug 11, Subsurface Community Meetup: Why Apache Arrow is the industry-standard for columnar data processing and transport. Virtual. https://subsurfacemeetupaugust2022.splashthat.com/
• Aug 14-18, KDD 2022: ACM SIGKDD 2022. Washington, DC, USA. https://kdd.org/kdd2022/
• Aug 15, 1st ACM SIGKDD Workshop on Content Understanding and Generation for E-commerce. Washington, DC, USA. https://content-generation.github.io/workshop/
• Aug 15-17, TDWI Data Literacy Bootcamp. Virtual. https://tdwi.org/events/seminars/august/tdwi-data-literacy-bootcamp/home.aspx
• Aug 15-17, Disney Data & Analytics Conference. Orlando, FL, USA. https://disneydataconference.com/
• Aug 16, StateOfTheArt() - Free AI Conference with Top AI/ML Influencers. Virtual. https://www.eventbrite.com/e/stateoftheart-free-ai-conference-with-top-aiml-influencers-tickets-379160628647
• Aug 16-18, Ai4 2022, the industry's leading AI event. Aug 16, Las Vegas, NV, USA. https://ai4.io/usa/application-attendee/
• Aug 23, The data dividend: Mumbai. Mumbai, India. Aug 23-24, Ray Summit. San Francisco, CA, USA. https://events.economist.com/custom-events/the-data-dividend-mumbai

🔥PyMLPipe: A lightweight MLOps Python Package
PyMLPipe is a lightweight Python package for MLOps processes. It helps to automate:
• Monitoring of models and data schemas
• Versioning of ML models and data
• Model performance comparison
• API deployment in one click
This source library supports Scikit-Learn, XGBoost, LightGBM and Pytorch. It has a modular structure, represented by a set of Python functions combined into an API and a visual graphical interface. PyMLPipe is great for working with tabular data.
https://neelindresh.github.io/pymlpipe.documentation.io/

👍🏻TOP 4 dbt tips for data analyst and data engineer
dbt (data build tool) is an open source code framework for executing, testing and documenting SQL queries, which allows you to process data analysis machine, including structuring and description of arrivals, their search, nested calls, rule triggering, documentation and testing. For example, you can use the dbt CLI or dbt Cloud to work with data collection to consume, transform, and load data into storage by computing a dynamic database on a schedule. To increase the efficiency of using dbt for the selection of schemas, sources and models, it is possible to use data:
• The Schema.yml file can only be found in the dbt models folder. The tool allows you to create a unit test that counts the duration of a column for nulls.
• dbt data tests have a strict rule that they must return null rows in order to pass the test. Instead of looking for a value such as the number of a particular set of rows, the data test should be written to expect to find null rows if the results do not match the correct set of sums. Therefore, when developing test data, you need to think about how to return 0 rows in the expected key, but at the same time you need to check the number. You can use the != or <= operators to validate data.
• To increase the speed of testing increase the number of threads in the project profile, in the profiles.yml file. For example, if there are 30 tests, then there are 40 threads, indicate in the profiles.yml file. Probably 30 data and schema tests in 4 seconds.
• The history test needs a meaningful name. Although dbt automatically learns the test names, it is recommended that you label them yourself. dbt doesn't have much control over running small test suites, it needs to be able to see all running projects. In the same way that developers are encouraged to use functions and variables with semantic name definitions, testing should be given tests for meaningful names. Otherwise, it will be difficult to determine which test passes or fails during test execution. When a test error is found in dbt, all schema and data tests are run together. It's not easy to use a single directory in the data tests folder, but you can name them "dbt test - schema" or "dbt test - data" to quickly determine which tests to use.

https://corissa-haury.medium.com/4-quick-facts-about-dbt-testing-5c32b487b8cd

Computational Complexity of Machine Learning Algorithms