❇️ انتشار #مقاله جدید با وابستگی کوتار

💠 An additively manufactured titanium tilting suture anchor: a biomechanical assessment on human and ovine bone specimens

👥 Ali Abedi, Farzad Pourghazi, Maysa Eslami, Mohammad Hossein Nabian, Ali Mohammad Ali Mohammadi, Leila Oryadi Zanjani, Farzam Farahmand*

📔 Frontiers in Surgery (Q3)

🗓 November 2023

🗂 Original Research

📄 Abstract: A novel titanium tilting suture anchor was designed and fabricated using additive manufacturing. The anchor enjoyed a nonsymmetrical structure to facilitate its insertion procedure through a weight-induced tilt, a saw-teeth penetrating edge to provide a strong initial fixation into cancellous bones of various densities, and an appropriate surface texture to enhance the longterm fixation strength through bone ingrowth. Biomechanical tests were performed on 10 ovine and 10 human cadaveric humeri to examine the insertion procedure and assess the initial fixation strength of the anchor, in comparison with a standard screw-type anchor as control. This study indicated a simple yet reliable insertion procedure for the tilting anchor. All anchors survived after 400 cycles of cyclic loadings and failed in the load-to-failure step. There were no significant differences between the displacements and fixation stiffnesses of the anchors in either group. The ultimate failure load was significantly smaller (p<0.05) for tilting anchors in ovine group (273.7 ± 129.72 N vs. 375.6 ± 106.36 N), but not different in human group (311.8 ± 82.55 N vs. 281.9 ± 88.35). Also, a larger number of tilting anchors were pulled out in ovine group (6 vs. 3) but a smaller number in human group (4 vs. 6). It was concluded that the biomechanical performance of the designed tilting anchor is comparable with that of the standard screw-type anchors.

🔗 https://doi.org/10.3389/fsurg.2023.1195728

📢 در صورتی که مقاله‌ای با وابستگی کوتار چاپ کرده‌اید، لطفا با ارسال آن برای @COTAR_Support ما را آگاه کنید.

🆔 @COTAR_TUMS